ALONI 90° horizontal pan connector – flexible conical Ø90-110 – length 66 cm

A 90° horizontal pan connector from Aloni is the standard solution when you want to connect a floor-standing toilet or WC pan to a wall outlet. With a 66 cm flexible pipe and a conical connection of Ø90 to 110 mm, this part fits the vast majority of waste pipes in existing bathrooms and cloakrooms. It is a small component, but the wrong choice here leads to leaks or a crooked installation.

Specifications

Is this product right for your situation?

This pan connector is intended for toilets connected to a wall outlet, where the waste pipe protrudes horizontally from the wall. The conical shape of the connection forms a watertight seal on pipes with a diameter between 90 and 110 mm, the common size in residential homes. The 66 cm flexible pipe gives you leeway to bridge the exact distance between the toilet pan and the wall outlet, even if the pan is not positioned at the ideal distance.

This model is not suitable for floor outlet connections or for concealed cisterns with a hidden waste behind the wall. If you have a wall-hung toilet with a concealed cistern, you do not need a separate pan connector; that connection is already built into the frame. Always check first that your wall outlet comes straight out of the wall; with an angled or recessed outlet, a different connector or offset ring may work better.

Installation and use

The most common mistake when fitting a horizontal pan connector is pushing the flexible pipe too far towards the wall outlet, causing the pipe to bend and creating a risk of dirt build-up. Slide the pipe as straight as possible in line with the outlet of the toilet pan and make sure the conical seal fits fully over the wall outlet for a watertight connection. Do not use sealant as a substitute for a poor fit; a good mechanical connection determines the lifespan.

Frequently asked questions

What is the difference between a horizontal pan connector and a vertical pan connector?

A horizontal pan connector connects the toilet pan to a waste pipe that protrudes horizontally from the wall. A vertical pan connector is designed for a waste that comes vertically up out of the floor. Always use the type that matches the position of your waste, otherwise the connector will not fit properly.

Does this pan connector fit all toilet pans?

The conical Ø90–110 mm connection fits most standard toilet pans with an outlet diameter in that range. Before installation, check the outlet size of your toilet pan, which is shown in the technical drawing of the toilet. If in doubt, the outlet size of the toilet pan is always decisive.

Can I shorten the flexible pipe if it is too long?

Yes, the flexible pipe can be shortened if the distance between the toilet pan and the wall outlet is less than 66 cm. Cut the pipe straight and deburr the cut edge thoroughly so that no sharp edges remain that could damage the seal. Always leave enough length for a firm and straight-running connection.

Browse the rest of the range in the toilet accessories and fittings collection or go to the overview of all toilets if you are also looking for a new toilet pan.

The Netherlands & Belgium: Ordered before 6:00 pm, delivered tomorrow

Germany: 1-3 working days

Rest of Europe: 3-8 working days

See our shipping page for more information here.

We offer a return or exchange policy of 14 days if you are not satisfied with your order for whatever reason. For more information, see our return policy here.